Electronic Lead Wire

Torpedo Specialty Wire's Copper Clad Steel is regularly drawn to very small diameters, electrplated and used in electronic leads. Electroplating requires excellent control of cladding and surface smoothness. These same requirements are met for all our clad products.

This high strength property is also inversely related and is demonstrated in the much higher flex fatigue life as compared to copper. Copper clad steel typically yields ten times more cycles than annealed copper.

The quantity of copper, clad over a steel core can be infinetley varied between 1-% and 75% by weight to meet any electrical conductivity requirement between 16% and 80% IACS.


APPLICATIONS:

Lead wirecan be cut and formed for use in electronic components such as capacitors, resistors, an diodes.

BASE METALS:

Size: .007"-.064" (33-14 AWG) 0,17mm - 1,5mm]

Copper Clad Steel 16% -70% Nickel Plated Copper (ETP and OFHC)
Nickel Alloys Copper Alloys Nickel Plated Steel

ELECTROPLATED METALS:

.062 to .109 inches in diameter
100% Tin Solder (All Tin Lead Ratios) Thickness Range From 100u in. - .001 in.
Coating Weights available are 1% - 30% Multiple Coatings (Including Nickel Underplate)

PACKAGING:

Dimensions (inches) Flange x Traverse
Capacity (pounds)

6"x3" Plastic Reel - 10 lbs.
6"x6" Plastic Reel - 20 lbs.
8"x6" Plastic Reel - 30 lbs.
DIN 250 Plastic Reel - 45 lbs.
12"x7" Plastic Reel - 65 lbs. s
Tapered Plastic Reel - 90 lbs.
Drum Fibre 13"ID x 22"OD -100 lbs.

Custom Packaging - Contact Plant